“When the Snow Foam and your beloved vehicle come into contact, a chemistry takes place that would make Cupid jealous”
Everyone recognizes it: a few typical Dutch days, the wrong (shortcut) routes, or at least a few times on the road while in brine.
All these circumstances create a situation that gives every car and motorcycle fanatic the creeps: a vehicle that is intensely contaminated with dirt that has become 'stuck' on the paint.
How do you remove the dirt, how do you ensure that it is not a job that takes up your entire weekend, how do you protect the paint of your car or motorcycle against scratches, in short: how do you get your car or motorcycle in good condition safely and effectively? beautiful?
A good pre-wash is the key to success
By using a good pre-wash such as the Snow Foam from The-Paddock , you can loosen the dirt in a very simple way, and you ensure that the dirt is also removed to the down.
Because the dirt loosens and is removed, most of the contamination is removed. This immediately reduces the risk of scratches and ensures the preservation of your paint.
How does it work?
The secret of The-Paddock's Snow Foam lies in the powerful yet gentle formula. By applying the Snow Foam you create a thick and dense foam layer that completely covers your motorcycle or car. This foam penetrates the dirt and dissolves it. Because the Snow Foam drips down, the dirt is also removed from your vehicle so that most of it is completely removed.
Because The-Paddock's Snow Foam has been specifically developed with effective, but safe cleaning in mind, the Snow Foam is perfect to use for removing insects, dirt, dust, mud and rubber.
How do I use the Snow Foam?
To know how to best use the Snow Foam , it is first important to clarify which device is being used. This doesn't make a huge difference, but it's always good to know the differences.
Foam lance with a high-pressure cleaner
The Snow Foam is very easy to use and can be applied in several ways.
The most effective way is to apply it with a foam lance on the high-pressure cleaner. The foam lance has a high pressure, which makes the foam effect much easier to achieve with a lower amount of Snow Foam.
By using the foam lance you can maintain a mixing ratio of 1-1.5/1000. This means that you only need 100ml to 150ml of Snow Foam for 900ML of water.
Apply Snow Foam with a hand sprayer/pressure sprayer
When using a pressure sprayer, it is important to increase the mixing ratio slightly. A pressure sprayer has a much lower amount of pressure compared to a foam lance, which makes the foaming process less easy to start.
Of course, the foam process can still be created very easily, namely by slightly increasing the amount of Snow Foam.
By using the pressure sprayer, you can maintain a mixing ratio of 2-2.5/1000. This means that you only need 200ml to 250ml of Snow Foam for 800ml of water.
User manual Snow Foam from The-Paddock
Now that we have a clear idea of the different options, we can look at how to use the Snow Foam:
- Rinse the surfaces thoroughly with water before applying the Snow Foam.
- Use 100-150ml for a foam lance and 200-250ml for a pressure sprayer in a 1L foam lance and fill with 750-900ml of water.
- Apply the foam to the surface from top to bottom and let it work for 3-5 minutes.
- Rinse thoroughly with water and do not allow the surfaces to dry.
- For thicker foam, use proportionately more liquid.
On which surfaces can I use the Snow Foam?
The Snow Foam from The-Paddock has been carefully developed. By developing the product in this way, you can safely use the Snow Foam on any type of vehicle, ranging from your car and motorcycle to your bicycle and boat.
The Snow Foam can also be used on all types of paint, such as:
- Glossy varnish;
- Matte paint;
- Paint with a wrap;
- Paint with PPF;
- Plastic parts;
- Rubber parts;
- All types of rims.
Conclusion
The Snow Foam from The-Paddock has been developed very efficiently, so you can quickly remove stubborn dirt from your vehicle without any worries!
Why should you choose the Snow Foam from The-Paddock? We have listed a number of reasons for you:
- Very effective;
- Highly concentrated formula;
- Silicone-free;
- Ph neutral;
- Huge thick layer of foam, but watery enough to remove the dirt;
- Suitable for all surfaces;
- Suitable for all types of vehicles;
- Incredible dilution ratio.
So what are you waiting for? Do you, like hundreds of other car and motorcycle enthusiasts, want to enjoy the best products? Order the Snow Foam from The-Paddock today and create your own Foam Party tomorrow!
The-Paddock pro tip:
Are you looking for a degreasing shampoo? Then The-Paddock Tough Cleaner is the product for you! The Ph-12 degreasing shampoo can be used in the foam lance and as a hand wash and is excellent to use in preparation for applying the Ceramic Seal !
